10.0.0.0.1 & 10.0.0.1 Admin Login

via Worldnewswire
ⓘ This article is third-party content and does not represent the views of this site. We make no guarantees regarding its accuracy or completeness.

10.0.0.1 IP address by default is used in many routers and enables the user to access the administration login page in order to configure them. On the contrary, it is thanks to private IP addresses, including 10.0.0.0.1, that the Internet has not crashed yet. In total, there are about 4 billion IP addresses in the IPv4 protocol, which is one of the key protocols of standards-based Internetworking technologies of the Internet, as well as the first regional Internet.

What is the 10.0.0.1 IP Address?

IP 10.0.0.1 is unique due to its ability to reuse itself. It belongs to the 24-bit block of private IP address space that is used for local area networks (LANs). Private IP addresses, unlike public ones, cannot be routed through the Internet, but at the same time, they are not useless.

Since then, network administrators and internet providers have used various methods of remapping one IP address space into another and use private IP addresses such as 10.0.0.1 as an alternative to public IP addresses.

The use of private IP v4 addresses including 10.0.0.1 is not uncommon in home and enterprise-level networking. That is the reason why routers continuously used to use login IPs such as 10.0.0.1, 192.168.0.1 and 192.168.1.1.

10.0.0.1 IP Address Login Steps

  • Connect your phone, laptop, or computer to the Wi-Fi network of the router using either a cable or wireless connection
  • Open any internet browser like Chrome, Firefox, Edge, or Safari
  • Enter http://10.0.0.1 in the address bar of the browser
  • Press Enter to open the router login page
  • Enter your router’s administrator username and password
  • Click the Login or Sign In button
  • Wait for the router’s administration dashboard to load
  • Open the required settings, such as Wi-Fi, security, network, or connected devices
  • Make your changes carefully and select Save or Apply when finished
  • Log out of the admin panel after completing your changes

Troubleshooting 10.0.0.1 Login Problems

If you don’t get any reply from the 10.0.0.1 login page or there is an error with your login details, then you can try the following:

  • Connection: Check whether you are on the right router’s network with your phone or computer.
  • IP Address: Type “http://10.0.0.1” in the address bar in your web browser and not in the search bar.
  • Default Gateway: Look around in the network settings to check if 10.0.0.1 is the default gateway of your router.
  • Try a Different Browser: Try accessing the IP address through different browsers like Google Chrome, Mozilla Firefox, Microsoft Edge, etc.
  • Turn Off Mobile Data: Turn off your mobile data and access the router through Wi-Fi.
  • Login Credentials Verification: Enter the valid admin username and password. Note that these may be different from your Wi-Fi login credentials.
  • Reset as the Last Option: In case of forgetting the admin password, please refer to the user manual to see how to reset your password. The factory reset could wipe out your custom configuration.
  • Contact the Administrator: In case of using a Piso WiFi network, contact its owner to verify the login address.

How to Change WiFi Password and Username?

You can change your WiFi network name (SSID) and password through the router’s admin panel. Follow these general steps:

How to Change the WiFi Password

  • Connect your phone or computer to the WiFi network of the router
  • In the web browser, type http://10.0.0.1 into the address bar
  • Login to the admin panel of your router with the username and password
  • Go to the menu options Wireless/WiFi Settings/ or Wireless Security
  • Choose the network that needs to be updated, for example, 2.4GHz or 5GHz
  • Look for the WiFi Password/ Wireless Password/Pre-Shared Key box
  • Enter a new, strong password
  • Click Save or Apply to confirm the changes
  • Reconnect your devices using the new password

How to Change the WiFi Username (Network Name)

  • Log in to the router admin panel at http://10.0.0.1
  • Open Wireless Settings or WiFi Configuration
  • Find the Network Name (SSID) field
  • Enter your preferred WiFi name
  • Check the settings for both 2.4 GHz and 5 GHz networks if your router has them
  • Click Save or Apply to update the name
  • Find your new WiFi name in the available networks list
  • Connect your devices using the updated network name and password

Uses of the 10.0.0.1 IP Address

  • Access Router Settings: Log into the router’s local admin panel to configure the network settings.
  • WiFi Password Change: Change the password of WiFi to make it secure.
  • WiFi Name Change: Change the name of the network (SSID).
  • Connected Device List: See the list of connected devices on WiFi.
  • Block Unnecessary Connections: Block the users who should not be using the network through access control settings.
  • Configure Network Security: Configure the network security and choose various encryption options.
  • Set Up Guest WiFi: If you have a guest WiFi feature, then set it up in your router.
  • Bandwidth Management: Distribute the bandwidth among the users who are on the network.
  • Parental Controls: Use this feature to limit the usage of WiFi by configuring the access restrictions.
  • Router Firmware: Download the latest firmware for your router from the manufacturer’s website.
  • Piso WiFi Sessions: Access the Piso customer portal and configure the session settings, including Pause Time.
  • Monitor Network Activity: Review connection status, usage information, and system details available in the admin dashboard.

Router Manufacturers With 10.0.0.1 IP Address

There are plenty of router manufacturing companies utilizing the 10.0.0.1 IP address due to its simplicity. Traditionally used for business networking purposes with many devices being connected to it, it is now becoming popular among many home routers as well. Popular manufacturers who make use of the 10.0.0.1 IP address by default are as follows:

  • Cisco
  • SMC
  • Technicolor
  • Arris
  • Aztech

Other companies such as Intelbras, RFNet and i-connect also manufacture routers that respond to the 10.0.0.1 IP address.

How to Block and Unblock WiFi User?

You can set up your connected devices through the admin panel of your router and either deny or permit access to a specific device or a denied one respectively. In case your gateway address is 10.0.0.1 on your router, then you have to follow all the following steps.

How to Block a WiFi User?

Connect your phone or PC to your WiFi network in your router

TP Link

  • Connect your device to the network
  • Log in to your device’s browser as admin
  • Proceed to advanced security settings for data usage control as well as user control
  • You will find the list of all users who use your network
  • All the unnecessary users who are using your WiFi can be blocked through the Block button

D-Link

  • IP address of your router or gateway to the browser (19216801/19216811).
  • Log in to your account using the username and password
  • Use the advanced settings and use the wireless access control to know who is utilizing the WiFi
  • Access control can be used in some networks
  • Save the settings to stop freeloaders

Net Gear

  • Connect your device to wifi and log in using the 10.0.0.1 admin login
  • Default Username and Password can be used to access all options
  • Then click on Advanced -> Wireless Settings -> Setup Access List
  • Here you can put in the name of the device for wireless cards and apply to save the settings
  • Access Control is available and others can be removed if needed
  • Now, you can access admin controls from select IP addresses
  • Nobody would be able to change any settings or access wifi

How to Unblock a WiFi User?

  • Get access to the admin console of your router at http://10.0.0.1
  • Provide administrator login details
  • Access “Access Control,” “Blocked Devices,” or “MAC Filtering”
  • Identify the device that you would like to re-enable
  • Choose “Unblock,” “Allow,” or “Remove From Block List”
  • Press “Save” or “Apply”
  • Disable and enable the WiFi on your device
  • Connect to the WiFi network using your current password
  • Verify that the device is now accessing the internet

Conclusion

IP address 10.0.0.1 helps the user connect to the management console of his/her router provided the IP address has been configured as the gateway of the computer that he/she is using. The IP address is helpful for managing Wi-Fi names and passwords, device connections, security features, etc. In case of Piso WiFi, the user may even find options like Pause Time in the management console.

FAQs

Why doesn’t 10.0.0.1 work?

The router can be configured with a different gateway IP address or you might not be connected to the correct network.

What are the default username and password for 10.0.0.1?

There is no default username and password for the 10.0.0.1 IP address. Kindly check your router label or manual for the correct admi istrator username and password.

Is it possible to change my WiFi password using 10.0.0.1 IP address?

Yes, provided your router uses the same IP address, you can change your WiFi password using its wireless or security settings.

How do I prohibit unknown devices from my WiFi?

Go to your router’s list of connected devices or Access Control and find the unknown device. There you can click the option to block access.

What is 10.0.0.1 Piso WiFi Pause Time?

It is a time management utility that enables users to pause the running WiFi session and continue it later on.

Name: Piso Wifi

Website: https://100001ip.net.ph/ 

Contact: contact@100001ip.net.ph

Report this content

If you believe this article contains misleading, harmful, or spam content, please let us know.

Report this article